Weights |
Blade Pull At Max Weight | 28260 lb
| Max Operation Weight - Total | 42500 lb
| Std Operation Weight - Total | 34830 lb
|
---|
|
Platform |
Articulation Angle | 50 degrees
|
---|
|
Blade |
Blade Base | 8.58 ft in
| Blade Down Pressure | 18021 lb
| Blade Tip Angle - Front | 47 degrees
| Blade Tip Angle - Rear | 5 degrees
|
---|
|
Engine & Fuel System |
Engine Make | 2244
| Engine Model | D7EGCE3
| Fuel Capacity | 92 gal
| Net Torque Gears 7-8 | 684 lb ft
| Torque Measured @ | 1550 rpm
| Net Power Gears 7-8 | 204 hp
| Number Of Cylinders | 6
| Power Measured @ | 1800 rpm
| Aspiration | Turbocharged, aftercooled
| Cooling System Fluid Capacity | 8.2 gal
| Displacement | 436 cu in
| Max Power | 204 hp
|
---|
|
Hydraulic System |
Pump Flow | 55 gal/min
| Pump Type | Axial Piston Pump
| Relief Valve Pressure | 3000 psi
| Oil System Fluid Capacity | 5.7 gal
|
---|
|
Dimensions, Wheels & Tires |
Max Reach Outside Tires - Left | 80 in
| Max Reach Outside Tires - Right | 79 in
| Tire Size | 14:00 x 24, G-2
| Wheelbase | 20.43 ft in
| Width Over Tires | 8.25 ft in
| Front Ground Clearance | 2 ft in
| Ground Clearance | 2 ft in
| Turning Radius | 23.9 ft in
| Overall Length | 29.25 ft in
| Height To Top Of Isomount Cab | 10.42 ft in
|
---|
|
Battery & Electrical System |
Alternator Supplied Amperage | 80 A
| Operating Voltage | 24 V
|
---|
|
Transmission |
Transmission Fluid Capacity | 16 gal
| Transmission Type | HTE 840, Fully sequential, direct drive, Volvo powershift transmission
| Max Speed - Forward | 28.4 mph
| Max Speed - Reverse | 20 mph
| Number Of Gears - Forward | 8
| Number Of Gears - Reverse | 4
|
---|
|
Technical Specs |
Wheel Lean | 18 degrees
| Oscillation - Total | 16 degrees
| Moldboard Width | 12 ft in
| Moldboard Height | 25 in
| Moldboard Thickness | 0.9 in
| Max Depth Of Cut | 31 in
| Side Shift Left | 26.5 in
| Side Shift Right | 26.5 in
| Diameter | 64 in
| Rotation | 360 degrees
| Shift Left | 30.5 in
| Shift Right | 29.5 in
| Max Lift Above Ground | 19.4 in
|
---|
|