Weights |
Blade Pull At Max Weight | 24098 lb
| Std Operation Weight - Total | 38250.2 lb
|
---|
|
Platform |
Articulation Angle | 22 degrees
|
---|
|
Blade |
Blade Base | 8.92 ft in
| Blade Down Pressure | 20308 lb
| Blade Tip Angle - Front | 44 degrees
| Blade Tip Angle - Rear | 6.5 degrees
|
---|
|
Engine & Fuel System |
Engine Make | 2244
| Engine Model | D10BGAE2
| Fuel Capacity | 120 gal
| Net Torque Gears 7-8 | 846 lb ft
| Torque Measured @ | 1100 rpm
| Net Power Gears 7-8 | 243 hp
| Power Measured @ | 2100 rpm
| Aspiration | turbocharged
| Cooling System Fluid Capacity | 8.2 gal
| Displacement | 586 cu in
| Max Power | 243 hp
|
---|
|
Hydraulic System |
Pump Flow | 75.1 gal/min
| Pump Type | load sensing hydraulic
| Relief Valve Pressure | 2700 psi
|
---|
|
Dimensions, Wheels & Tires |
Max Reach Outside Tires - Left | 79.5 in
| Max Reach Outside Tires - Right | 79 in
| Tire Size | 14.00 x 24 , G-2
| Wheelbase | 8.92 ft in
| Width Over Tires | 8.34 ft in
| Ground Clearance | 2.1 ft in
| Overall Length | 30.25 ft in
| Height To Top Of Isomount Cab | 10.17 ft in
|
---|
|
Battery & Electrical System |
Alternator Supplied Amperage | 80 A
| Operating Voltage | 24 V
|
---|
|
Transmission |
Transmission Fluid Capacity | 10.1 gal
| Transmission Type | powershift
| Max Speed - Forward | 27.2 mph
| Max Speed - Reverse | 19.5 mph
| Number Of Gears - Forward | 8
| Number Of Gears - Reverse | 4
|
---|
|
Technical Specs |
Wheel Lean | 15 degrees
| Oscillation - Total | 16 degrees
| Moldboard Width | 12 ft in
| Moldboard Height | 29 in
| Moldboard Thickness | 1 in
| Max Depth Of Cut | 32 in
| Side Shift Left | 26.5 in
| Side Shift Right | 26.5 in
| Diameter | 66.3 in
| Rotation | 360 degrees
| Shift Left | 30.5 in
| Shift Right | 29.5 in
| Max Lift Above Ground | 17.5 in
|
---|
|