| Weights |
|---|
| Total Operating Weight | 40829.7 lb
|
|---|
|
| Platform |
|---|
| Steering Articulation Angle | 25 degrees
|
|---|
|
| Ripper |
|---|
| Ripper Beam Width | 7.57 ft in
|
|---|
| Ripper Penetration Force | 20232.9 lb
|
|---|
| Ripper Pry Out Force | 28685.7 lb
|
|---|
|
| Blade |
|---|
| Blade Down Pressure | 19665.3 lb
|
|---|
| Blade Length | 12.2 ft in
|
|---|
| Blade Pull | 26091.8 lb
|
|---|
| Blade Tip Angle | 40 ° forward, 5 ° backward
|
|---|
| Maximum Blade Angle | 90 degrees
|
|---|
| Maximum Cutting Depth | 2.1 ft in
|
|---|
| Cutting Edge | 152 x 16 mm
|
|---|
|
| Engine & Fuel System |
|---|
| Engine Model | KOMATSU SAA6D107E-1
|
|---|
| Engine Type | Water-cooled, 4-cycle, direct injection
|
|---|
| Fuel Tank - Diesel | 109.9 gal
|
|---|
| Gross Power | 221.3 hp
|
|---|
| Max Torque | 694.1 lb ft
|
|---|
| Torque Rise | 31%
|
|---|
| Net Power | 218.6 hp
|
|---|
| Number Of Cylinders | 6
|
|---|
| Aspiration | Turbocharged and air to air aftercooled
|
|---|
| Cooling System | 6.6 gal
|
|---|
| Fan Speed | Max. 1500 rpm
|
|---|
| Air Cleaner | 2-stage, dry-type
|
|---|
|
| Drive System |
|---|
| Drawbar Frame | 210 x 25 mm
|
|---|
| Final Drive | 4.5 gal
|
|---|
| Maximum Steering Range | 49 degrees
|
|---|
|
| Hydraulic System |
|---|
| Hydraulic System | 18.3 gal
|
|---|
| Maximum System Pressure | 3000 psi
|
|---|
|
| Dimensions, Wheels & Tires |
|---|
| Tandem Wheelbase | 5 ft in
|
|---|
| Clearance | 1.28 ft in
|
|---|
| Ground Clearance | 2.1 ft in
|
|---|
| Minimum Turning Radius | 24.28 ft in
|
|---|
| Overall Length | 34.7 ft in
|
|---|
| Wheel Axle Spacing | 5.1 ft in
|
|---|
| Track Gauge | 7.11 ft in
|
|---|
|
| Battery & Electrical System |
|---|
| Battery | 2, low maintenance plus, 12 volt, 1146 cca
|
|---|
| Electrical | 24 volt with 90 amp alternator
|
|---|
|
| Transmission |
|---|
| Transmission | 11.9 gal
|
|---|
| Circle Reverse Housing | 1.9 gal
|
|---|
|
| Technical Specs |
|---|
| Front Tyre To Rear Bumper | 30.21 ft in
|
|---|
| Height: Low Profile Cab | 10.5 ft in
|
|---|
| Width Of Moldboard (Optional) | 12.18 ft in
|
|---|
| Width Of Moldboard (Standard) | 14.18 ft in
|
|---|
| Width Of Tyres | 8.54 ft in
|
|---|
| Side Wall Thickness: Inner | 0.1 ft in
|
|---|
| Side Wall Thickness: Outer | 0.1 ft in
|
|---|
| Tandem Oscillation | 11° forward, 13 ° reverse
|
|---|
| Piston Displacement | 408.3 cu in
|
|---|
| Front Frame Structure - Width | 1 ft in
|
|---|
| Bore | 4.3 in
|
|---|
| Stroke | 4.9 in
|
|---|
| Tandem Housing | 15.1 gal
|
|---|
| Crankcase | 6.2 gal
|
|---|
| Wheel Lean | 20 degrees
|
|---|
| Oscillation - Total | 32 degrees
|
|---|
| Front Axle Type | Solid bar construction welded steel sections
|
|---|
| Moldboard Side Shift Right | 2.7 ft in
|
|---|
| Standby Pressure | 500 psi
|
|---|
| Moldboard Side Shift Left | 2.7 ft in
|
|---|
| Output | 52.9 gal/min
|
|---|
| Maximum Lift Above Ground | 1.6 ft in
|
|---|
| Circle Center Shift Right | 2 ft in
|
|---|
| Circle Center Shift Left | 1.9 ft in
|
|---|
| Moldboard Width | 12.2 ft in
|
|---|
| Moldboard Height | 25.4 in
|
|---|
| Moldboard Thickness | 0.9 in
|
|---|
| Arc Radius | 1.1 ft in
|
|---|
| Diameter | 60.3 in
|
|---|
|
