Weights |
Blade Pull At Max Weight | 45131 lb
| Max Operation Weight - Total | 69648 lb
| Std Operation Weight - Total | 54550 lb
|
---|
|
Platform |
Articulation Angle | 20 degrees
|
---|
|
Blade |
Blade Base | 10.08 ft in
| Blade Down Pressure | 34901.4 lb
| Blade Tip Angle - Front | 40 degrees
| Blade Tip Angle - Rear | 5 degrees
|
---|
|
Engine & Fuel System |
Engine Make | 2236
| Engine Model | 3196 ETA
| Fuel Capacity | 130 gal
| Net Torque Gears 7-8 | 1143 lb ft
| Net Power Gear 1-2 | 265 hp
| Net Power Gear 4-6 | 285 hp
| Net Power Gear 5-6 | 285 hp
| Net Power Gears 7-8 | 285 hp
| Number Of Cylinders | 6
| Power Measured @ | 2000 rpm
| Cooling System Fluid Capacity | 12.3 gal
| Displacement | 726 cu in
| Max Power | 285 hp
|
---|
|
Hydraulic System |
Pump Flow | 66 gal/min
| Pump Type | axial piston
| Relief Valve Pressure | 3500 psi
|
---|
|
Dimensions, Wheels & Tires |
Max Reach Outside Tires - Left | 91 in
| Max Reach Outside Tires - Right | 91 in
| Tandem Axle Wheelbase | 6 ft in
| Wheelbase | 22.83 ft in
| Width Over Tires | 10.08 ft in
| Front Ground Clearance | 2.4 ft in
| Ground Clearance | 2.4 ft in
| Rear Ground Clearance | 1.34 ft in
| Turning Radius | 27 ft in
| Overall Length | 32.79 ft in
| Height To Top Of Isomount Cab | 11.58 ft in
|
---|
|
Battery & Electrical System |
Alternator Supplied Amperage | 75 A
| Operating Voltage | 24 V
|
---|
|
Transmission |
Circle Gearbox Fluid Capacity | 2.1 gal
| Transmission Type | direct drive, power shift, planetary
| Max Speed - Forward | 29.9 mph
| Max Speed - Reverse | 28.4 mph
| Number Of Gears - Forward | 8
| Number Of Gears - Reverse | 8
|
---|
|
Technical Specs |
Wheel Lean | 18 degrees
| Oscillation - Total | 32 degrees
| Moldboard Width | 16 ft in
| Moldboard Height | 31 in
| Moldboard Thickness | 1 in
| Max Depth Of Cut | 18.5 in
| Side Shift Left | 25.6 in
| Side Shift Right | 31.1 in
| Diameter | 71.8 in
| Shift Left | 27.2 in
| Shift Right | 22 in
| Max Lift Above Ground | 16.5 in
|
---|
|