Weights |
Blade Pull At Max Weight | 46193 lb
| Max Operation Weight - Total | 51326 lb
| Std Operation Weight - Total | 35890 lb
|
---|
|
Platform |
Articulation Angle | 20 degrees
|
---|
|
Blade |
Blade Base | 8.26 ft in
| Blade Down Pressure | 31669.5 lb
| Blade Tip Angle - Front | 40 degrees
| Blade Tip Angle - Rear | 5 degrees
|
---|
|
Engine & Fuel System |
Engine Make | 2236
| Engine Model | 3176C DITA ATAAC VHP
| Fuel Capacity | 105 gal
| Net Power Gear 1-2 | 180 hp
| Net Power Gear 4-6 | 200 hp
| Net Power Gear 5-6 | 200 hp
| Net Power Gears 7-8 | 220 hp
| Cooling System Fluid Capacity | 10 gal
| Displacement | 629 cu in
| Max Power | 220 hp
|
---|
|
Hydraulic System |
Pump Flow | 54.4 gal/min
| Pump Type | axial piston
| Relief Valve Pressure | 3500 psi
|
---|
|
Dimensions, Wheels & Tires |
Max Reach Outside Tires - Left | 87.5 in
| Max Reach Outside Tires - Right | 89 in
| Tandem Axle Wheelbase | 5 ft in
| Wheelbase | 20.25 ft in
| Width Over Tires | 8.39 ft in
| Front Ground Clearance | 2.05 ft in
| Ground Clearance | 2.1 ft in
| Rear Ground Clearance | 1.13 ft in
| Turning Radius | 24.6 ft in
| Overall Length | 28.58 ft in
| Height To Top Of Isomount Cab | 10.25 ft in
|
---|
|
Transmission |
Circle Gearbox Fluid Capacity | 1.8 gal
| Transmission Type | direct-drive power shift
| Max Speed - Forward | 27.1 mph
| Max Speed - Reverse | 21.4 mph
| Number Of Gears - Forward | 8
| Number Of Gears - Reverse | 6
|
---|
|
Technical Specs |
Wheel Lean | 18 degrees
| Oscillation - Total | 32 degrees
| Moldboard Width | 14 ft in
| Moldboard Height | 27 in
| Moldboard Thickness | 1 in
| Max Depth Of Cut | 30.3 in
| Side Shift Left | 33.5 in
| Side Shift Right | 37.1 in
| Diameter | 60.2 in
| Shift Left | 33.4 in
| Shift Right | 34.7 in
| Max Lift Above Ground | 17.8 in
|
---|
|