Weights |
Blade Pull At Max Weight | 29980.7 lb
| Max Operation Weight - Total | 48987 lb
| Std Operation Weight - Total | 39892 lb
|
---|
|
Platform |
Articulation Angle | 20 degrees
|
---|
|
Blade |
Blade Base | 8.24 ft in
| Blade Down Pressure | 27236 lb
| Blade Tip Angle - Front | 40 degrees
| Blade Tip Angle - Rear | 5 degrees
|
---|
|
Engine & Fuel System |
Engine Model | C7.1 ACERT
| Fuel Capacity | 99.9 gal
| Torque | 692.6 lb ft
| Net Power Gear 1-2 | 145 hp
| Number Of Cylinders | 6
| Power Measured @ | 2100 rpm
| Cooling System Fluid Capacity | 13 gal
| Displacement | 427.8 cu in
|
---|
|
Hydraulic System |
Pump Flow | 55.7 gal/min
| Pump Type | Variable piston
| Relief Valve Pressure | 3500 psi
| Oil System Fluid Capacity | 8 gal
|
---|
|
Dimensions, Wheels & Tires |
Max Reach Outside Tires - Left | 68.6 in
| Max Reach Outside Tires - Right | 75 in
| Tandem Axle Wheelbase | 4.96 ft in
| Tire Size | 17.5 R25
| Wheelbase | 19.42 ft in
| Width Over Tires | 8.24 ft in
| Ground Clearance | 1.9 ft in
| Rear Ground Clearance | 1.15 ft in
| Turning Radius | 24.3 ft in
| Overall Length | 28.94 ft in
| Height To Top Of Isomount Cab | 10.86 ft in
|
---|
|
Transmission |
Circle Gearbox Fluid Capacity | 1.9 gal
| Transmission Type | direct drive, powershift
| Max Speed - Forward | 28.4 mph
| Max Speed - Reverse | 22.5 mph
| Number Of Gears - Forward | 8
| Number Of Gears - Reverse | 6
|
---|
|
Technical Specs |
Bore | 4.2 in
| Stroke | 5.4 in
| Wheel Lean | 18 degrees
| Oscillation - Total | 32 degrees
| Moldboard Width | 12 ft in
| Moldboard Height | 24 in
| Moldboard Thickness | 0.9 in
| Max Depth Of Cut | 28.4 in
| Side Shift Left | 20.1 in
| Side Shift Right | 26 in
| Diameter | 60.3 in
| Rotation | 360 degrees
| Shift Left | 25.9 in
| Shift Right | 25.9 in
| Max Lift Above Ground | 16.9 in
|
---|
|